Skip navigation

Completing Activation for Your BLU Studio Device (GSM Only)

Follow

Last updated by Giselle Russell

Follow these directions to complete activation for the for the:

  • BLU Studio Mini LTE
  • BLU Studio 6.0 LTE

NOTE:  Wi-Fi calling is not supported for these devices.

Before beginning these directions, insert your activated Ting GSM X1 SIM card.

If you have the BLU Studio 6.0 LTE, ensure that the card is in SIM Slot 1.

 

These are the manual steps for setting up data, MMS (picture/video/group messaging), and the personal hotspot (tethering) on your BLU Studio device.

 

1. Reset APN's to Default

Before beginning these directions, insert your activated Ting GSM X1 SIM card.

  1. Go to Settings
  2. Tap More networks (under Connections tab, or More, Wireless & networks, Wireless Controls, Wireless Manager, Phone Information)
  3. Mobile or Cellular networks
  4. Access Point Names
  5. Tap the Menu icon (located near + or Add icon)
  6. Tap Reset to default 

 

Important: Before you begin entering the access point name settings below, please check the field for the APN Protocol and the APN Roaming Protocol to see if the option 'IPv4/IPv6' is present. If so, step 2 below is all you will need to enter into the phone for data and MMS.

**Skip to step 3 and 4 if your phone does NOT have the option 'IPv4/IPv6' and enter two separate APN profiles. 

 

2. Add Ting Data/MMS APN Profile (IPv4/IPv6)

You should already be in the access point name section, if so, skip to step #5.

  1. Go to Settings
  2. Tap More networks (under Connections tab, or More, Wireless & networks, Wireless Controls, Wireless Manager, Phone Information)
  3. Mobile or Cellular networks
  4. Access Point Names
  5. Add a new APN (Menu or + icon)
  6. Enter APN settings
    • Name: Ting Data
    • APN: wholesale
    • APN type: default,admin,fota,mms,supl,hipri,internet,dun
      • If there is a free form field, enter the above exactly as written without spaces
      • If your device has a series of check boxes rather than a free form field, check all the boxes that correspond with the values listed above.
        • For example: if your device has checkboxes for default, mms, supl, wap and ia, check only default, mms and supl.
    • MMSC: http://wholesale.mmsmvno.com/mms/wapenc
    • MCC: 310 (should already be set)
    • MNC: 260 (should already be set)
    • APN protocol: IPv4/IPv6
    • APN roaming protocol: IPv4/IPv6
  7. Tap the Menu icon (3 dots) icon 
  8. Tap Save  
  9. Select Ting Data as your APN
  10. Restart your device and wait for it to find the Ting network (this may take a minute or so)
  11. Confirm that you're able to access data, send/receive picture, video and group messages

 

-------------------------------------------------------------------------------------------------------------------------

 

3. Add Ting Data APN Profile (IPv6)

You should already be in the access point name section, if so, skip to step #5.

  1. Go to Settings
  2. Tap More networks (under Connections tab, or More, Wireless & networks, Wireless Controls, Wireless Manager, Phone Information)
  3. Mobile or Cellular networks
  4. Access Point Names
  5. Add a new APN (Menu or + icon)
  6. Enter APN settings
    • Name: Ting Data
    • APN: wholesale
    • APN type: default,admin,fota,mms,supl,hipri,internet,dun
      • If there is a free form field, enter the above exactly as written without spaces
      • If your device has a series of check boxes rather than a free form field, check all the boxes that correspond with the values listed above.
        • For example: if your device has checkboxes for default, mms, supl, wap and ia, check only default, mms and supl
    • MMSC: http://wholesale.mmsmvno.com/mms/wapenc
    • MCC: 310 (should already be set)
    • MNC: 260 (should already be set)
    • APN protocol: IPv6
    • APN roaming protocol: IPv6
  7. Tap the Menu icon (3 dots) icon 
  8. Tap Save  
  9. Select Ting Data as your APN
  10. Restart your device and wait for it to find the Ting network (this may take a minute or so)
  11. Confirm that you're able to access data

 

4. Add Ting MMS APN Profile (IPv4)

You should already be in the access point name section, if so, skip to step #5.

  1. Go to Settings
  2. Tap More networks (under Connections tab, or More, Wireless & networks, Wireless Controls, Wireless Manager, Phone Information)
  3. Mobile or Cellular networks
  4. Access Point Names
  5. Add a new APN (Menu or + icon)
  6. Enter APN settings
    • Name: Ting MMS
    • APN: wholesale
    • APN type: mms
      • If there is a free form field, enter the APN type exactly as written above
      • If your device has a series of check boxes rather than a free form field, check mms only
    • MMSC: http://wholesale.mmsmvno.com/mms/wapenc
    • MCC: 310 (should already be set)
    • MNC: 260 (should already be set)
    • APN protocol: IPv4
    • APN roaming protocol: IPv4
  7. Tap the Menu icon
  8. Tap Save
  9. Keep Ting Data selected as your APN (your phone will use the MMS APN settings automatically as it needs to)
  10. Restart your device and wait for it to find the Ting network (this may take a minute or so)
  11. Confirm that you're able to send/receive picture, video and group messages

 

If you run into any trouble, you can refer to our Troubleshooting GSM Android activation guide for help. 

 

** If you got to this page by way of a link in the activation process, go back to that browser tab and click "It worked" to see your phone number.**

Have more questions? Submit a request

Comments

  • Avatar
    Ricardo Howell

    These settings also worked for the BLU Life One 4G LTE. Thank you!

  • Avatar
    Attila Szabo

    Works for BLU Studio Energy 2 as well

  • Avatar
    Stephen Dix

    Worked for Asus Zenfone 2 (USA) GSM

  • Avatar
    Robert McKay
    Rob The instructions are very easy to follow, nice work Ting
  • Avatar
    Angel Melendez

    I only had check boxes for the following step:

    --APN type: In the field, enter the following exactly as written without spaces: default,admin,fota,mms,supl,hipri,internet,dun--

    The only choices from this list were default and dun.

    Edit: I have the BLU Life One X.

    Edited by Angel Melendez
  • Avatar
    Brian McLellan

    For phones with check-boxes, you just need to check the options that are listed in the list. So default and dun are the ones you want to checkmark.

  • Avatar
    Jonathan Rohland

    FYI, this solved my issues with MMS (pic texts and replying to group messages) on my BLU R1 HD. Everything works like a charm now. The only differences from the above instructions are what Angel and Brian already pointed out... just check whatever boxes apply to your phone. Thanks!

Powered by Zendesk