[Ting Voice] How do I set up E911?

This feature is limited release.

Ting Voice is only available to a select group of limited release participants. If you are not participating, this article does not apply!


An E911 address allows emergency services to determine the location of each phone or device in case they need to call 911. The registered address must be the physical address where the device is located and include any additional information (such as a suite, apartment, building, etc.) necessary to identify the caller's location. 

Setting up E911

  1. From the Ting Voice Portal, go to Business Cloud > Phone Numbers.
  2. Click the left side of the phone number to view the E911 Record.
  3. If the E911 address is the same as the CSR (Customer Service Record), check the Same as CSR Record box. If not, uncheck the box and enter the correct information in the fields below. When you’re done, click Save. It may take several hours for the changes to take effect.

    Note:
    Select
    Manual Entry if you would like to add additional, specific information for E911 services such as unit number, unit type, and other details.

mceclip0.png

E911 Emergency Services

When you call 911, the address associated with your phone number is used to direct the call to the correct local emergency response units, known as Public Safety Access Points (PSAPs). The PSAP, in turn, uses that address to direct the emergency response units to your location.

To ensure rapid response times, 911 addresses are standardized so that they are accurate and unambiguous for the emergency response units. The PSAPs are responsible for standardizing all addresses in their jurisdiction. That record of standardized addresses is known as the MSAG (Master Street Address Guide).

Address Validation

When activating a number, we require an address to be associated with it. Sometimes the address provided initially isn’t in a standard format (referring to a street by a nickname versus the official name, omitting the directional, outdated street name, etc.), which can cause confusion with and delay response times for emergency services, or worse.

To best serve you, we validate every address back to the MSAG. If the address cannot be validated, we will contact you to correct it.

If an address is not validated, calls to 911 will not only be charged a fee but will also add a delay to the routing process while the national call center agents ask the address. In worst-case scenarios, if the caller is unable to communicate clearly, the call could not get routed at all, which could result in death and legal action. It is important to address rejections in a timely manner and to ensure your address recorded with us is the correct address.

911 for Remote Office Users

Each phone is set with a 911 callback number and an associated location address. This allows remote users to be part of the company phone system and still send their remote office address and direct callback number to the 911 operator if they dial 911.

Warning

If there is a power or internet outage, your phone may not be able to place a 911 call.

Was this article helpful?